- 追加された行はこの色です。
- 削除された行はこの色です。
[[Rsync de backup]]
#contents
portinstall sysutils/smartmontools
/bin/mkdir -p /usr/local/etc/periodic/daily
install -o root -g wheel -m 555 /usr/ports/sysutils/smartmontools/work/smart /usr/local/etc/periodic/daily/smart
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive
/usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive
/usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive
To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.
To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
===> Compressing manual pages for smartmontools-5.42_4
===> Registering installation for smartmontools-5.42_4
===> Cleaning for smartmontools-5.42_4
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
http://www.kkaneko.com/rinkou/freebsd/smartmontoolsfreebsd.html
/etc/rc.conf
smartd_enable="YES"
/etc/periodic.conf
daily_status_smart_devices="/dev/ada0 /dev/daa0"
daily_status_smart_devices="/dev/ada1 /dev/daa1"
daily_status_smart_devices="/dev/ada2 /dev/daa2"
daily_status_smart_devices="/dev/ada3 /dev/daa3"
ドライブの監視 (monitoring) を行いたいときは,設定ファイル /usr/local/etc/smartd.conf を作成すること.
※ サンプルが /usr/local/etc/smartd.conf.sample にある
** smartmontoolsの設定 [#h7e8a3e6]
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
/usr/local/etc/smartd.conf.sample という設定ファイルがあるので、smartd.confというファイル名でコピーして、中身を書き換えます。
# cd /usr/local/etc/
# cp smartd.conf.sample smartd.conf
# ls -l smartd.conf
-r--r--r-- 1 root wheel 4890 Jun 12 22:59 smartd.conf
# chmod +w smartd.conf
# vi smartd.conf
smartd.confに、ぎっしりと、いろんな情報が書いてあるので、それを読めば、だいたい、どう設定すればいいのかわかります。また、「man smartd.conf」でマニュアルも見られます。
smartd.confで設定すべきポイントは、2つくらいかな。
*** 「DEVICESCAN」という行をコメントアウトする [#jadba409]
DEVICESCANという行以降に書いてある内容は、無視されるそうです。
これ・・・私、ず~っと知りませんでした。1年以上前からsmartmontoolsを使っていて、つい先日、気がつきました。ディスクドライブでエラーが発生したことを、メールで通知する機能がsmartmontoolsにはあるのですが、1度としてメールが来たことがなかったんです。でも、手でコマンドを実行して、SMARTのエラー記録を確認すると、知らないうちに、ポロポロとエラーが発生しているんです。
「なんでなんだろう?」・・・はっ!こんなことが書いてある・・・
# The word DEVICESCAN will cause any remaining lines in this
# configuration file to be ignored:
そうですか。私が悪かったんです。すみません。
*** ディスクドライブごとにチェック項目を書いていく [#v0e418a1]
実はよくわかってないのですが(無責任ですみません)、smartd.confの中にサンプルがたくさん書かれているので、それをまねして、以下のように書きました。
/dev/ad0 -a -o on -S on -s (S/../.././03|L/../../6/07) -H -m root
/dev/ad1 -a -o on -S on -s (S/../.././04|L/../../6/08) -H -m root
/dev/ad2 -a -o on -S on -s (S/../.././05|L/../../6/09) -H -m root
/dev/ad3 -a -o on -S on -s (S/../.././06|L/../../6/10) -H -m root
ATAのハードディスクが4台つながっていて、ad0~ad3として認識されてるので、4行書いているのですが、1台だけなら/dev/ad0の行だけで十分です。
「-s」で、自己診断テスト(self-test)を定期的に行うように指定する。short testとか、longテストとか、いろいろあるらしい。
「-m root」で、エラーが発生したら、rootあてにメールを送る。
というような意味らしいです。
*** smartctlコマンドで、ドライブの情報を読み出す [#jce36a73]
# smartctl -a /dev/ad6