- 追加された行はこの色です。
- 削除された行はこの色です。
[[Rsync de backup]]
#contents
*smartd[5262]: [#y57fd282]
Jul 23 15:07:55 G7 smartd[5262]: Device: /dev/ada1, WARNING: There are known problems with these drives,
Jul 23 15:07:55 G7 smartd[5262]: see the following Seagate web pages:
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagate.com/articles/en_US/FAQ/207931en
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagate.com/articles/en_US/FAQ/207963en
Jul 23 15:07:56 G7 smartd[5262]: Device: /dev/ada3, WARNING: There are known problems with these drives,
Jul 23 15:07:56 G7 smartd[5262]: THIS DRIVE MAY OR MAY NOT BE AFFECTED,
Jul 23 15:07:56 G7 smartd[5262]: see the following web pages for details:
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagate.com/articles/en_US/FAQ/207931en
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagate.com/articles/en_US/FAQ/207951en
Jul 23 15:07:56 G7 smartd[5262]: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632758
*** portinstall sysutils/smartmontools [#z1a915a8]
/bin/mkdir -p /usr/local/etc/periodic/daily
install -o root -g wheel -m 555 /usr/ports/sysutils/smartmontools/work/smart /usr/local/etc/periodic/daily/smart
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive
/usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive
/usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive
To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.
To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
===> Compressing manual pages for smartmontools-5.42_4
===> Registering installation for smartmontools-5.42_4
===> Cleaning for smartmontools-5.42_4
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
http://www.kkaneko.com/rinkou/freebsd/smartmontoolsfreebsd.html
*** echo 'smartd_enable="YES"' >> /etc/rc.conf [#va21e2b9]
↑するか、もしくは、↓
/etc/rc.conf
smartd_enable="YES"
**接続されているHDDのデバイス名を調べる [#z4100d91]
guard# atacontrol list
ATA channel 0:
Master: no device present
Slave: no device present
ATA channel 1:
Master: no device present
Slave: no device present
ATA channel 2:
Master: ad4 <WDC WD1602ABYS-19B7A0/02.03B03> SATA revision 2.x
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
ATA channel 4:
Master: no device present
Slave: no device present
ATA channel 5:
Master: acd0 <HL-DT-ST DVDROM DH20N/NC04> SATA revision 1.x
Slave: no device present
おまけ
guard# atacontrol cap ad4
とするとシリアル番号、モデル名なども表示します。
**接続されているHDDのデバイス名を調べる FreeBSD 9.0R 以降 [#g0f0f5e9]
FreeBSD 9.0R以降では、
# atacontrol list
atacontrol:
ATA_CAM option is enabled in kernel.
Please use camcontrol instead.
デフォルトで ATA to CAM が有効になってて、camcontrol を使ってねってことになったった。
G7# camcontrol devlist
<VB0250EAVER HPG7> at scbus0 target 0 lun 0 (ada0,pass0)
<ST3500320NS SN05> at scbus0 target 1 lun 0 (ada1,pass1)
<Hitachi HDS721050CLA362 JP2OA39C> at scbus1 target 0 lun 0 (ada2,pass2)
<ST3500320AS SD15> at scbus1 target 1 lun 0 (ada3,pass3)
<hp DVDROM DH40N IS01> at scbus3 target 0 lun 0 (cd0,pass4)
***(オプション)/etc/periodic.conf の設定 [#o0685287]
smartctl コマンドで表示される状況レポートに, 日毎レポート (dairy status reports) を含めたいときは, /etc/periodic.conf に次のような1行を含めておく. 「/dev/ad0 /dev/da0」の部分は監視したいドライブ名に設定すること.
/etc/periodic.conf
daily_status_smart_devices="/dev/ad0 /dev/da0"
ドライブの監視 (monitoring) を行いたいときは,設定ファイル /usr/local/etc/smartd.conf を作成すること.
※ サンプルが /usr/local/etc/smartd.conf.sample にある
** smartmontoolsの設定 [#h7e8a3e6]
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
/usr/local/etc/smartd.conf.sample という設定ファイルがあるので、smartd.confというファイル名でコピーして、中身を書き換えます。
# cd /usr/local/etc/
# cp smartd.conf.sample smartd.conf
# ls -l smartd.conf
-r--r--r-- 1 root wheel 4890 Jun 12 22:59 smartd.conf
# chmod +w smartd.conf
# vi smartd.conf
smartd.confに、ぎっしりと、いろんな情報が書いてあるので、それを読めば、だいたい、どう設定すればいいのかわかります。また、「man smartd.conf」でマニュアルも見られます。
smartd.confで設定すべきポイントは、2つくらいかな。
*** 「DEVICESCAN」という行をコメントアウトする [#jadba409]
DEVICESCANという行以降に書いてある内容は、無視されるそうです。
# The word DEVICESCAN will cause any remaining lines in this
# configuration file to be ignored:
*** ディスクドライブごとにチェック項目を書いていく [#v0e418a1]
実はよくわかってないのですが(無責任ですみません)、smartd.confの中にサンプルがたくさん書かれているので、それをまねして、以下のように書きました。
guard の場合は
/dev/ad4 -a -o on -S on -s (S/../.././03|L/../../6/07) -H -m root
guard# /usr/local/etc/rc.d/smartd start
G7だと、
/dev/ada0 -a -o on -S on -s (S/../.././03|L/../../6/07) -H -m root
/dev/ada1 -a -o on -S on -s (S/../.././04|L/../../6/08) -H -m root
/dev/ada2 -a -o on -S on -s (S/../.././05|L/../../6/09) -H -m root
/dev/ada3 -a -o on -S on -s (S/../.././06|L/../../6/10) -H -m root
&ref(IMG_20120626_144826.jpg{, [zoom], [50%]});
&ref(http://piano2nd.smb.net/~kuji/pukiwiki-1.4.7/index.php?plugin=attach&pcmd=open&file=IMG_20120626_144826.jpg&refer=HDD%E7%AE%A1%E7%90%86%20sysutils%2Fsmartmontools);
SATAのハードディスクが4台つながっていて、ada0~ada3として認識されてるので、4行書いているのですが、1台だけなら/dev/ada0の行だけで十分。
「-s」で、自己診断テスト(self-test)を定期的に行うように指定する。short testとか、longテストとか、いろいろあるらしい。
「-m root」で、エラーが発生したら、rootあてにメールを送る。
というような意味らしいです。
*** smartctlコマンドで、ドライブの情報を読み出す [#jce36a73]
# smartctl -a /dev/ada6