- 追加された行はこの色です。
- 削除された行はこの色です。
CONTENTS
#contents
----
Lastmodified &lastmod;
----
*Areca [#ga528b05]
http://dokuosan.net/zousan/nikki105.html
http://www.kuji-clinic.info:81/
http://www.kingtech.co.jp/common/products/areca/file/RAIDCard_BIOSUPDATE_TCPIP.pdf
http://www.ask-corp.jp/faq/index.php?action=artikel&cat=58&id=431&artlang=ja
**dmesg [#e42ea669]
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller
arcmsr version 1.20.00.28 2013-09-13
> mem 0xe0600000-0xe0600fff,0xe0000000-0xe03fffff irq 18 at device 14.0 on pci2
Areca RAID adapter0: ARC-1210 F/W version V1.46 2008-08-06
atapci1: <Intel ICH8 SATA300 controller> port 0x2438-0x243f,0x2454-0x2457,0x2430-0x2437,0x2450-0x2453,0x2410-0x241f,0x2400-0x240f irq 19 at device 31.2 on pci0
ata3: <ATA channel> at channel 0 on atapci1
ata4: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH8 SATA300 controller> port 0x2428-0x242f,0x244c-0x244f,0x2420-0x2427,0x2448-0x244b,0x20f0-0x20ff,0x20e0-0x20ef irq 19 at device 31.5 on pci0
ata5: <ATA channel> at channel 0 on atapci2
ata6: <ATA channel> at channel 1 on atapci2
pass1 at arcmsr0 bus 0 scbus0 target 16 lun 0
pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device
da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: Serial Number 0000000442740780
da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 228881MB (468749312 512 byte sectors: 255H 63S/T 29178C)
** smartctl [#u4453142]
# smartctl -a --device=areca,3/1 /dev/arcmsr0 -T permissive
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: Input/output error
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Thu Sep 3 18:02:45 2015 JST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# smartctl -a -d areca,1 /dev/sg1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/sg1 [areca_disk#01_enc#01] failed: Input/output error
**portinstall sysutils/areca-cli [#v62a3c06]
# areca-cli disk info drv=01
Drive Information
===============================================================
IDE Channel : 1
Model Name : Hitachi HTS723212L9A360
Serial Number : 081206FC1B00NGG
Firmware Rev. : FCBOC30F
Disk Capacity : 120.0GB
Device State : NORMAL
Timeout Count : 0
Media Error Count : 0
Device Temperature : 32 C
SMART Read Error Rate : 100(62)
SMART Spinup Time : 253(33)
SMART Reallocation Count : 100(5)
SMART Seek Error Rate : 100(67)
SMART Spinup Retries : 100(60)
SMART Calibration Retries : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.
* disc failer [#k82735e5]
# areca-cli disk info drv=03
GuiErrMsg<0x12>: No Such Device.
アラームが鳴動していて、No1のHDDが故障している模様。そほまま、引き抜き。
手元のSSDをボリューム削除してブランクにして、Hotなまま挿入。自動でリビルドがはじまる。
# areca-cli disk info drv=03
Drive Information
===============================================================
IDE Channel : 3
Model Name : INTEL SSDSC2CT240A4
Serial Number : CVKI3201004J240
Firmware Rev. : 335u
Disk Capacity : 240.1GB
Device State : NORMAL
Timeout Count : 0
Media Error Count : 0
Device Temperature : 255 C
SMART Read Error Rate : 255(255)
SMART Spinup Time : 255(255)
SMART Reallocation Count : 100(0)
SMART Seek Error Rate : 255(255)
SMART Spinup Retries : 255(255)
SMART Calibration Retries : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.
----
Total access &counter(total);:本日 &counter(today);:昨日 &counter(yesterday);
#counter([total|today|yesterday]);