![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
portinstall sysutils/smartmontools
/bin/mkdir -p /usr/local/etc/periodic/daily
install -o root -g wheel -m 555 /usr/ports/sysutils/smartmontools/work/smart /usr/local/etc/periodic/daily/smart
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive
/usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive
/usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive
To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.
To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
===> Compressing manual pages for smartmontools-5.42_4
===> Registering installation for smartmontools-5.42_4
===> Cleaning for smartmontools-5.42_4
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
http://www.kkaneko.com/rinkou/freebsd/smartmontoolsfreebsd.html
/etc/rc.conf
smartd_enable="YES"
/etc/periodic.conf
daily_status_smart_devices="/dev/ada0 /dev/daa0" daily_status_smart_devices="/dev/ada1 /dev/daa1" daily_status_smart_devices="/dev/ada2 /dev/daa2" daily_status_smart_devices="/dev/ada3 /dev/daa3"
ドライブの監視 (monitoring) を行いたいときは，設定ファイル /usr/local/etc/smartd.conf を作成すること．
※ サンプルが /usr/local/etc/smartd.conf.sample にある
