HDD管理 sysutils/smartmontools
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[Rsync de backup]]
#contents
*smartd[5262]: [#y57fd282]
Jul 23 15:07:55 G7 smartd[5262]: Device: /dev/ada1, WARN...
Jul 23 15:07:55 G7 smartd[5262]: see the following Seaga...
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: Device: /dev/ada3, WARN...
Jul 23 15:07:56 G7 smartd[5262]: THIS DRIVE MAY OR MAY N...
Jul 23 15:07:56 G7 smartd[5262]: see the following web p...
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: http://bugs.debian.org/...
*** portinstall sysutils/smartmontools [#z1a915a8]
Installing smartmontools-7.3_1...
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first...
/usr/local/sbin/smartctl -a /dev/da0 for first...
/usr/local/sbin/smartctl -a /dev/ada0 for first...
To include drive health information in your daily status...
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART...
To enable drive monitoring, you can use /usr/local/sbin/...
A sample configuration file has been installed as
/ usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit ap...
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
===> Cleaning for smartmontools-7.3_1
https://www.kkaneko.jp/tools/freebsd/smartmontoolsfreebsd...
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
http://www.kkaneko.com/rinkou/freebsd/smartmontoolsfreebs...
*** echo 'smartd_enable="YES"' >> /etc/rc.conf [#...
↑する
**接続されているHDDのデバイスを調べる [#b36ac451]
# camcontrol devlist
<ST3000DM007-1WY10G 0001> at scbus0 target 0 lu...
<HL-DT-ST DVDROM DH40N NP02> at scbus2 target 0 lu...
# camcontrol identify ada0
pass0: <ST3000DM007-1WY10G 0001> ACS-3 ATA SATA 3.x device
pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192b...
protocol ACS-3 ATA SATA 3.x
device model ST3000DM007-1WY10G
firmware revision 0001
serial number ZFN0VVYY
WWN 5000c500a5dc6e76
additional product id
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 4096, offset 0
LBA supported 268435455 sectors
LBA48 supported 5860533168 sectors
PIO supported PIO4
DMA supported WDMA2 UDMA6
media RPM 5425
Zoned-Device Commands no
Feature Support Enabled Value ...
read ahead yes yes
write cache yes yes
flush cache yes yes
Native Command Queuing (NCQ) yes 32 tags
NCQ Priority Information no
NCQ Non-Data Command no
NCQ Streaming no
Receive & Send FPDMA Queued no
NCQ Autosense yes
SMART yes yes
security yes no
power management yes yes
microcode download yes yes
advanced power management no no
automatic acoustic management no no
media status notification no no
power-up in Standby yes no
write-read-verify no no
unload no no
general purpose logging yes yes
free-fall no no
sense data reporting yes no
extended power conditions yes yes
device statistics notification no no
Data Set Management (DSM/TRIM) no
Trusted Computing no
encrypts all user data no
Sanitize yes overwrite,
Sanitize - commands allowed yes
Sanitize - antifreeze lock yes
Host Protected Area (HPA) yes no 58605331...
HPA - Security yes no
Accessible Max Address Config no
# /usr/local/sbin/smartctl -a /dev/ada0
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd6...
Copyright (C) 2002-22, Bruce Allen, Christian Franke, ww...
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5 (SMR)
Device Model: ST3000DM007-1WY10G
Serial Number: ZFN0VVYY
LU WWN Device Id: 5 000c50 0a5dc6e76
Firmware Version: 0001
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5425 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 20 08:50:38 2023 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data col...
was completed wi...
Auto Offline Dat...
Self-test execution status: ( 0) The previous sel...
without error or...
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Of...
Auto Offline dat...
Suspend Offline ...
command.
Offline surface ...
Self-test suppor...
Conveyance Self-...
Selective Self-t...
SMART capabilities: (0x0003) Saves SMART data...
power-saving mode.
Supports SMART a...
Error logging capability: (0x01) Error logging su...
General Purpose ...
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 366) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30a5) SCT Status suppo...
SCT Data Table s...
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH ...
この↓先頭行の数値は0で有ることが望まれていてこの状態だと...
https://www.kishiro.com/FreeBSD/hdd_malfunction_forcast.h...
1 Raw_Read_Error_Rate 0x000f 075 064 006 ...
3 Spin_Up_Time 0x0003 096 096 000 ...
4 Start_Stop_Count 0x0032 100 100 020 ...
5 Reallocated_Sector_Ct 0x0033 100 100 010 ...
7 Seek_Error_Rate 0x000f 091 060 045 ...
9 Power_On_Hours 0x0032 054 054 000 ...
10 Spin_Retry_Count 0x0013 100 100 097 ...
12 Power_Cycle_Count 0x0032 100 100 020 ...
183 Runtime_Bad_Block 0x0032 100 100 000 ...
184 End-to-End_Error 0x0032 100 100 099 ...
187 Reported_Uncorrect 0x0032 100 100 000 ...
188 Command_Timeout 0x0032 100 100 000 ...
189 High_Fly_Writes 0x003a 100 100 000 ...
190 Airflow_Temperature_Cel 0x0022 066 058 040 ...
191 G-Sense_Error_Rate 0x0032 100 100 000 ...
192 Power-Off_Retract_Count 0x0032 100 100 000 ...
193 Load_Cycle_Count 0x0032 097 097 000 ...
194 Temperature_Celsius 0x0022 034 042 000 ...
195 Hardware_ECC_Recovered 0x001a 075 064 000 ...
197 Current_Pending_Sector 0x0012 100 100 000 ...
198 Offline_Uncorrectable 0x0010 100 100 000 ...
199 UDMA_CRC_Error_Count 0x003e 200 200 000 ...
240 Head_Flying_Hours 0x0000 100 253 000 ...
241 Total_LBAs_Written 0x0000 100 253 000 ...
242 Total_LBAs_Read 0x0000 100 253 000 ...
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaini...
# 1 Short offline Completed without error 0...
# 2 Short offline Completed without error 0...
# 3 Short offline Completed without error 0...
# 4 Extended offline Completed without error 0...
# 5 Short offline Completed without error 0...
# 6 Short offline Completed without error 0...
# 7 Short offline Completed without error 0...
# 8 Short offline Completed without error 0...
# 9 Short offline Completed without error 0...
#10 Short offline Completed without error 0...
#11 Short offline Completed without error 0...
#12 Extended offline Completed without error 0...
#13 Short offline Completed without error 0...
#14 Short offline Completed without error 0...
#15 Short offline Completed without error 0...
#16 Short offline Completed without error 0...
#17 Short offline Completed without error 0...
#18 Short offline Completed without error 0...
#19 Short offline Completed without error 0...
#20 Extended offline Completed without error 0...
#21 Short offline Completed without error 0...
SMART Selective self-test log data structure revision nu...
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remain...
If Selective self-test is pending on power-up, resume af...
***（オプション）/etc/periodic.conf の設定 [#o0685287]
smartctl コマンドで表示される状況レポートに， 日毎レポー...
/etc/periodic.conf
daily_status_smart_devices="/dev/ad0 /dev/ada0"
G7だと
daily_status_smart_devices="/dev/ada0 /dev/ada1 /dev/ada...
ドライブの監視 (monitoring) を行いたいときは，設定ファイ...
※ サンプルが /usr/local/etc/smartd.conf.sample にある
** smartmontoolsの設定 [#h7e8a3e6]
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
/usr/local/etc/smartd.conf.sample という設定ファイルがあ...
# cd /usr/local/etc/
# cp smartd.conf.sample smartd.conf
# ls -l smartd.conf
-r--r--r-- 1 root wheel 4890 Jun 12 22:59 smartd.conf
# chmod +w smartd.conf
# vi smartd.conf
# cp /usr/local/etc/smartd.conf.sample /usr/local/etc/sm...
smartd.confに、ぎっしりと、いろんな情報が書いてあるので、...
smartd.confで設定すべきポイントは、２つくらいかな。
*** 「DEVICESCAN」という行をコメントアウトする [#jadba409]
DEVICESCANという行以降に書いてある内容は、無視されるそう...
# The word DEVICESCAN will cause any remaining lines in ...
# configuration file to be ignored:
*** ディスクドライブごとにチェック項目を書いていく [#v0e...
実はよくわかってないのですが（無責任ですみません）、smart...
guard の場合は
/dev/ad4 -a -o on -S on -s (S/../.././03|L/../../6/07) -...
guard# /usr/local/etc/rc.d/smartd start
G7だと、
/dev/ada0 -a -o on -S on -s (S/../.././03|L/../../6/07) ...
/dev/ada1 -a -o on -S on -s (S/../.././04|L/../../6/08) ...
/dev/ada2 -a -o on -S on -s (S/../.././05|L/../../6/09) ...
/dev/ada3 -a -o on -S on -s (S/../.././06|L/../../6/10) ...
&ref(IMG_20120626_144826.jpg,{[zoom], [50%]});
&ref(http://piano2nd.smb.net/~kuji/pukiwiki-1.4.7/index.p...
SATAのハードディスクが4台つながっていて、ada0～ada3として...
「-s」で、自己診断テスト（self-test）を定期的に行うように...
「-m root」で、エラーが発生したら、rootあてにメールを送る。
というような意味らしいです。
*** smartctlコマンドで、ドライブの情報を読み出す [#jce36a...
# smartctl -a /dev/ada6
*areca raid board [#v198872f]
# smartctl -a /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
=== START OF INFORMATION SECTION ===
Vendor: Areca
Product: ARC-1210-VOL#00
Revision: R001
User Capacity: 239,999,647,744 bytes [239 GB]
Logical block size: 512 bytes
Rotation Rate: 10000 rpm
Logical Unit id: 0x0004d927fffff800
Serial number: 0000000442740780
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Thu Sep 3 17:09:51 2015 JST
SMART support is: Available - device has SMART capab...
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 25 C
Manufactured in week 30 of year 2002
Specified cycle count over device lifetime: 4278190080
Accumulated start-stop cycles: 256
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correct...
ECC rereads/ errors algorit...
fast | delayed rewrites corrected invocat...
read: 0 0 0 0 0...
write: 0 0 0 0 0...
Non-medium error count: 0
Device does not support Self Test logging
https://www.freebsd.org/cgi/man.cgi?query=smartctl&sektio...
areca,N - [FreeBSD, Linux, Windows and Cygwin only] th...
consists of one or more SATA disks connected to a...
RAID controller. The positive integer N (in the ra...
24 inclusive) denotes which disk on the controller...
On FreeBSD use syntax such as:
smartctl -a -d areca,2 /dev/arcmsr1
smartctl -a -d areca,3 /dev/arcmsr2
The first line above addresses the second disk...
Areca RAID controller. The second line addresses ...
on the second Areca RAID controller.
Important: the Areca controller must have firmwar...
or later. Lower-numbered firmware versions will g...
SCSI error messages and no SMART information.
areca,N/E - [FreeBSD, Linux, Windows and Cygw...
EXPERIMENTAL SMARTCTL FEATURE] the device consist...
more SATA or SAS disks connected to an Areca...
troller. The integer N (range 1 to 128) denotes ...
(slot) and E (range 1 to 8) denotes the enclosur...
This requires Areca SAS controller firmware ver...
later.
# smartctl -a -d areca,1 /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Read Device Identity failed: Input/output error
A mandatory SMART command failed: exiting. To continue, ...
https://www.smartmontools.org/wiki/Supported_RAID-Control...
# smartctl -a -d areca,1 /dev/arcmsr1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/arcmsr1 [areca_disk#01_enc#01...
終了行:
[[Rsync de backup]]
#contents
*smartd[5262]: [#y57fd282]
Jul 23 15:07:55 G7 smartd[5262]: Device: /dev/ada1, WARN...
Jul 23 15:07:55 G7 smartd[5262]: see the following Seaga...
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:55 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: Device: /dev/ada3, WARN...
Jul 23 15:07:56 G7 smartd[5262]: THIS DRIVE MAY OR MAY N...
Jul 23 15:07:56 G7 smartd[5262]: see the following web p...
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: http://knowledge.seagat...
Jul 23 15:07:56 G7 smartd[5262]: http://bugs.debian.org/...
*** portinstall sysutils/smartmontools [#z1a915a8]
Installing smartmontools-7.3_1...
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first...
/usr/local/sbin/smartctl -a /dev/da0 for first...
/usr/local/sbin/smartctl -a /dev/ada0 for first...
To include drive health information in your daily status...
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART...
To enable drive monitoring, you can use /usr/local/sbin/...
A sample configuration file has been installed as
/ usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit ap...
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
===> Cleaning for smartmontools-7.3_1
https://www.kkaneko.jp/tools/freebsd/smartmontoolsfreebsd...
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
http://www.kkaneko.com/rinkou/freebsd/smartmontoolsfreebs...
*** echo 'smartd_enable="YES"' >> /etc/rc.conf [#...
↑する
**接続されているHDDのデバイスを調べる [#b36ac451]
# camcontrol devlist
<ST3000DM007-1WY10G 0001> at scbus0 target 0 lu...
<HL-DT-ST DVDROM DH40N NP02> at scbus2 target 0 lu...
# camcontrol identify ada0
pass0: <ST3000DM007-1WY10G 0001> ACS-3 ATA SATA 3.x device
pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192b...
protocol ACS-3 ATA SATA 3.x
device model ST3000DM007-1WY10G
firmware revision 0001
serial number ZFN0VVYY
WWN 5000c500a5dc6e76
additional product id
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 4096, offset 0
LBA supported 268435455 sectors
LBA48 supported 5860533168 sectors
PIO supported PIO4
DMA supported WDMA2 UDMA6
media RPM 5425
Zoned-Device Commands no
Feature Support Enabled Value ...
read ahead yes yes
write cache yes yes
flush cache yes yes
Native Command Queuing (NCQ) yes 32 tags
NCQ Priority Information no
NCQ Non-Data Command no
NCQ Streaming no
Receive & Send FPDMA Queued no
NCQ Autosense yes
SMART yes yes
security yes no
power management yes yes
microcode download yes yes
advanced power management no no
automatic acoustic management no no
media status notification no no
power-up in Standby yes no
write-read-verify no no
unload no no
general purpose logging yes yes
free-fall no no
sense data reporting yes no
extended power conditions yes yes
device statistics notification no no
Data Set Management (DSM/TRIM) no
Trusted Computing no
encrypts all user data no
Sanitize yes overwrite,
Sanitize - commands allowed yes
Sanitize - antifreeze lock yes
Host Protected Area (HPA) yes no 58605331...
HPA - Security yes no
Accessible Max Address Config no
# /usr/local/sbin/smartctl -a /dev/ada0
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd6...
Copyright (C) 2002-22, Bruce Allen, Christian Franke, ww...
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5 (SMR)
Device Model: ST3000DM007-1WY10G
Serial Number: ZFN0VVYY
LU WWN Device Id: 5 000c50 0a5dc6e76
Firmware Version: 0001
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5425 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 20 08:50:38 2023 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data col...
was completed wi...
Auto Offline Dat...
Self-test execution status: ( 0) The previous sel...
without error or...
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Of...
Auto Offline dat...
Suspend Offline ...
command.
Offline surface ...
Self-test suppor...
Conveyance Self-...
Selective Self-t...
SMART capabilities: (0x0003) Saves SMART data...
power-saving mode.
Supports SMART a...
Error logging capability: (0x01) Error logging su...
General Purpose ...
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 366) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30a5) SCT Status suppo...
SCT Data Table s...
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH ...
この↓先頭行の数値は0で有ることが望まれていてこの状態だと...
https://www.kishiro.com/FreeBSD/hdd_malfunction_forcast.h...
1 Raw_Read_Error_Rate 0x000f 075 064 006 ...
3 Spin_Up_Time 0x0003 096 096 000 ...
4 Start_Stop_Count 0x0032 100 100 020 ...
5 Reallocated_Sector_Ct 0x0033 100 100 010 ...
7 Seek_Error_Rate 0x000f 091 060 045 ...
9 Power_On_Hours 0x0032 054 054 000 ...
10 Spin_Retry_Count 0x0013 100 100 097 ...
12 Power_Cycle_Count 0x0032 100 100 020 ...
183 Runtime_Bad_Block 0x0032 100 100 000 ...
184 End-to-End_Error 0x0032 100 100 099 ...
187 Reported_Uncorrect 0x0032 100 100 000 ...
188 Command_Timeout 0x0032 100 100 000 ...
189 High_Fly_Writes 0x003a 100 100 000 ...
190 Airflow_Temperature_Cel 0x0022 066 058 040 ...
191 G-Sense_Error_Rate 0x0032 100 100 000 ...
192 Power-Off_Retract_Count 0x0032 100 100 000 ...
193 Load_Cycle_Count 0x0032 097 097 000 ...
194 Temperature_Celsius 0x0022 034 042 000 ...
195 Hardware_ECC_Recovered 0x001a 075 064 000 ...
197 Current_Pending_Sector 0x0012 100 100 000 ...
198 Offline_Uncorrectable 0x0010 100 100 000 ...
199 UDMA_CRC_Error_Count 0x003e 200 200 000 ...
240 Head_Flying_Hours 0x0000 100 253 000 ...
241 Total_LBAs_Written 0x0000 100 253 000 ...
242 Total_LBAs_Read 0x0000 100 253 000 ...
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaini...
# 1 Short offline Completed without error 0...
# 2 Short offline Completed without error 0...
# 3 Short offline Completed without error 0...
# 4 Extended offline Completed without error 0...
# 5 Short offline Completed without error 0...
# 6 Short offline Completed without error 0...
# 7 Short offline Completed without error 0...
# 8 Short offline Completed without error 0...
# 9 Short offline Completed without error 0...
#10 Short offline Completed without error 0...
#11 Short offline Completed without error 0...
#12 Extended offline Completed without error 0...
#13 Short offline Completed without error 0...
#14 Short offline Completed without error 0...
#15 Short offline Completed without error 0...
#16 Short offline Completed without error 0...
#17 Short offline Completed without error 0...
#18 Short offline Completed without error 0...
#19 Short offline Completed without error 0...
#20 Extended offline Completed without error 0...
#21 Short offline Completed without error 0...
SMART Selective self-test log data structure revision nu...
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remain...
If Selective self-test is pending on power-up, resume af...
***（オプション）/etc/periodic.conf の設定 [#o0685287]
smartctl コマンドで表示される状況レポートに， 日毎レポー...
/etc/periodic.conf
daily_status_smart_devices="/dev/ad0 /dev/ada0"
G7だと
daily_status_smart_devices="/dev/ada0 /dev/ada1 /dev/ada...
ドライブの監視 (monitoring) を行いたいときは，設定ファイ...
※ サンプルが /usr/local/etc/smartd.conf.sample にある
** smartmontoolsの設定 [#h7e8a3e6]
http://nhh.mo-blog.jp/ttt/2006/06/smartmontools_0720.html
/usr/local/etc/smartd.conf.sample という設定ファイルがあ...
# cd /usr/local/etc/
# cp smartd.conf.sample smartd.conf
# ls -l smartd.conf
-r--r--r-- 1 root wheel 4890 Jun 12 22:59 smartd.conf
# chmod +w smartd.conf
# vi smartd.conf
# cp /usr/local/etc/smartd.conf.sample /usr/local/etc/sm...
smartd.confに、ぎっしりと、いろんな情報が書いてあるので、...
smartd.confで設定すべきポイントは、２つくらいかな。
*** 「DEVICESCAN」という行をコメントアウトする [#jadba409]
DEVICESCANという行以降に書いてある内容は、無視されるそう...
# The word DEVICESCAN will cause any remaining lines in ...
# configuration file to be ignored:
*** ディスクドライブごとにチェック項目を書いていく [#v0e...
実はよくわかってないのですが（無責任ですみません）、smart...
guard の場合は
/dev/ad4 -a -o on -S on -s (S/../.././03|L/../../6/07) -...
guard# /usr/local/etc/rc.d/smartd start
G7だと、
/dev/ada0 -a -o on -S on -s (S/../.././03|L/../../6/07) ...
/dev/ada1 -a -o on -S on -s (S/../.././04|L/../../6/08) ...
/dev/ada2 -a -o on -S on -s (S/../.././05|L/../../6/09) ...
/dev/ada3 -a -o on -S on -s (S/../.././06|L/../../6/10) ...
&ref(IMG_20120626_144826.jpg,{[zoom], [50%]});
&ref(http://piano2nd.smb.net/~kuji/pukiwiki-1.4.7/index.p...
SATAのハードディスクが4台つながっていて、ada0～ada3として...
「-s」で、自己診断テスト（self-test）を定期的に行うように...
「-m root」で、エラーが発生したら、rootあてにメールを送る。
というような意味らしいです。
*** smartctlコマンドで、ドライブの情報を読み出す [#jce36a...
# smartctl -a /dev/ada6
*areca raid board [#v198872f]
# smartctl -a /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
=== START OF INFORMATION SECTION ===
Vendor: Areca
Product: ARC-1210-VOL#00
Revision: R001
User Capacity: 239,999,647,744 bytes [239 GB]
Logical block size: 512 bytes
Rotation Rate: 10000 rpm
Logical Unit id: 0x0004d927fffff800
Serial number: 0000000442740780
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Thu Sep 3 17:09:51 2015 JST
SMART support is: Available - device has SMART capab...
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 25 C
Manufactured in week 30 of year 2002
Specified cycle count over device lifetime: 4278190080
Accumulated start-stop cycles: 256
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correct...
ECC rereads/ errors algorit...
fast | delayed rewrites corrected invocat...
read: 0 0 0 0 0...
write: 0 0 0 0 0...
Non-medium error count: 0
Device does not support Self Test logging
https://www.freebsd.org/cgi/man.cgi?query=smartctl&sektio...
areca,N - [FreeBSD, Linux, Windows and Cygwin only] th...
consists of one or more SATA disks connected to a...
RAID controller. The positive integer N (in the ra...
24 inclusive) denotes which disk on the controller...
On FreeBSD use syntax such as:
smartctl -a -d areca,2 /dev/arcmsr1
smartctl -a -d areca,3 /dev/arcmsr2
The first line above addresses the second disk...
Areca RAID controller. The second line addresses ...
on the second Areca RAID controller.
Important: the Areca controller must have firmwar...
or later. Lower-numbered firmware versions will g...
SCSI error messages and no SMART information.
areca,N/E - [FreeBSD, Linux, Windows and Cygw...
EXPERIMENTAL SMARTCTL FEATURE] the device consist...
more SATA or SAS disks connected to an Areca...
troller. The integer N (range 1 to 128) denotes ...
(slot) and E (range 1 to 8) denotes the enclosur...
This requires Areca SAS controller firmware ver...
later.
# smartctl -a -d areca,1 /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Read Device Identity failed: Input/output error
A mandatory SMART command failed: exiting. To continue, ...
https://www.smartmontools.org/wiki/Supported_RAID-Control...
# smartctl -a -d areca,1 /dev/arcmsr1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 a...
Copyright (C) 2002-15, Bruce Allen, Christian Franke, ww...
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/arcmsr1 [areca_disk#01_enc#01...
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
