CONTENTS


Lastmodified 2018-04-26 (木) 09:51:58


Areca

http://dokuosan.net/zousan/nikki105.html

http://www.kuji-clinic.info:81/

http://www.kingtech.co.jp/common/products/areca/file/RAIDCard_BIOSUPDATE_TCPIP.pdf

http://www.ask-corp.jp/faq/index.php?action=artikel&cat=58&id=431&artlang=ja

dmesg

arcmsr0: <Areca SATA 3G Host Adapter RAID Controller
arcmsr version 1.20.00.28 2013-09-13
> mem 0xe0600000-0xe0600fff,0xe0000000-0xe03fffff irq 18 at device 14.0 on pci2
Areca RAID adapter0: ARC-1210 F/W version V1.46 2008-08-06

atapci1: <Intel ICH8 SATA300 controller> port 0x2438-0x243f,0x2454-0x2457,0x2430-0x2437,0x2450-0x2453,0x2410-0x241f,0x2400-0x240f irq 19 at device 31.2 on pci0
ata3: <ATA channel> at channel 0 on atapci1
ata4: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH8 SATA300 controller> port 0x2428-0x242f,0x244c-0x244f,0x2420-0x2427,0x2448-0x244b,0x20f0-0x20ff,0x20e0-0x20ef irq 19 at device 31.5 on pci0
ata5: <ATA channel> at channel 0 on atapci2
ata6: <ATA channel> at channel 1 on atapci2

pass1 at arcmsr0 bus 0 scbus0 target 16 lun 0
pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device
da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: Serial Number 0000000442740780
da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 228881MB (468749312 512 byte sectors: 255H 63S/T 29178C)

smartctl

# smartctl -a --device=areca,3/1 /dev/arcmsr0 -T permissive
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: Input/output error

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Thu Sep  3 18:02:45 2015 JST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# smartctl -a -d areca,1 /dev/sg1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/sg1 [areca_disk#01_enc#01] failed: Input/output error

portinstall sysutils/areca-cli

# areca-cli disk info drv=01
Drive Information
===============================================================
IDE Channel                        : 1
Model Name                         : Hitachi HTS723212L9A360
Serial Number                      : 081206FC1B00NGG
Firmware Rev.                      : FCBOC30F
Disk Capacity                      : 120.0GB
Device State                       : NORMAL
Timeout Count                      : 0
Media Error Count                  : 0
Device Temperature                 : 32 C
SMART Read Error Rate              : 100(62)
SMART Spinup Time                  : 253(33)
SMART Reallocation Count           : 100(5)
SMART Seek Error Rate              : 100(67)
SMART Spinup Retries               : 100(60)
SMART Calibration Retries          : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.

disc failer

# areca-cli disk info drv=03
GuiErrMsg<0x12>: No Such Device.

アラームが鳴動していて、No1のHDDが故障している模様。そほまま、引き抜き。

手元のSSDをボリューム削除してブランクにして、Hotなまま挿入。自動でリビルドがはじまる。

# areca-cli disk info drv=03
Drive Information
===============================================================
IDE Channel                        : 3
Model Name                         : INTEL SSDSC2CT240A4
Serial Number                      : CVKI3201004J240
Firmware Rev.                      : 335u
Disk Capacity                      : 240.1GB
Device State                       : NORMAL
Timeout Count                      : 0
Media Error Count                  : 0
Device Temperature                 : 255 C
SMART Read Error Rate              : 255(255)
SMART Spinup Time                  : 255(255)
SMART Reallocation Count           : 100(0)
SMART Seek Error Rate              : 255(255)
SMART Spinup Retries               : 255(255)
SMART Calibration Retries          : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.

Areca de SMART

https://www.smartmontools.org/ticket/230

root@kuji:~:18_04_26:9:46 # smartctl --all --device=areca,1/1 /dev/arcmsr0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 10.4-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 7K320
Device Model:     Hitachi HTS723212L9A360
Serial Number:    081206FC1B00NGG0ZNAC
LU WWN Device Id: 5 000cca 587c07314
Firmware Version: FCBOC30F
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 3f
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Apr 26 09:47:27 2018 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  645) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  45) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       1470
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   001   001   000    Old_age   Always       -       44549
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1470
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   093   093   000    Old_age   Always       -       1457
193 Load_Cycle_Count        0x0012   001   001   000    Old_age   Always       -       6352148
194 Temperature_Celsius     0x0002   177   177   000    Old_age   Always       -       31 (Min/Max 15/44)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Total access 2437:本日 1:昨日 0

Counter: 2437, today: 1, yesterday: 0

トップ   編集 凍結 差分 履歴 添付 複製 名前変更 リロード   新規 一覧 検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2018-04-26 (木) 09:51:58