- 追加された行はこの色です。
- 削除された行はこの色です。
CONTENTS
#contents
----
Lastmodified &lastmod;
----
*Areca [#ga528b05]
http://dokuosan.net/zousan/nikki105.html
http://www.kuji-clinic.info:81/
http://www.kingtech.co.jp/common/products/areca/file/RAIDCard_BIOSUPDATE_TCPIP.pdf
http://www.ask-corp.jp/faq/index.php?action=artikel&cat=58&id=431&artlang=ja
**dmesg [#e42ea669]
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller
arcmsr version 1.20.00.28 2013-09-13
> mem 0xe0600000-0xe0600fff,0xe0000000-0xe03fffff irq 18 at device 14.0 on pci2
Areca RAID adapter0: ARC-1210 F/W version V1.46 2008-08-06
atapci1: <Intel ICH8 SATA300 controller> port 0x2438-0x243f,0x2454-0x2457,0x2430-0x2437,0x2450-0x2453,0x2410-0x241f,0x2400-0x240f irq 19 at device 31.2 on pci0
ata3: <ATA channel> at channel 0 on atapci1
ata4: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH8 SATA300 controller> port 0x2428-0x242f,0x244c-0x244f,0x2420-0x2427,0x2448-0x244b,0x20f0-0x20ff,0x20e0-0x20ef irq 19 at device 31.5 on pci0
ata5: <ATA channel> at channel 0 on atapci2
ata6: <ATA channel> at channel 1 on atapci2
pass1 at arcmsr0 bus 0 scbus0 target 16 lun 0
pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device
da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: Serial Number 0000000442740780
da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 228881MB (468749312 512 byte sectors: 255H 63S/T 29178C)
** smartctl [#u4453142]
# smartctl -a --device=areca,3/1 /dev/arcmsr0 -T permissive
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: Input/output error
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Thu Sep 3 18:02:45 2015 JST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# smartctl -a -d areca,1 /dev/sg1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
do_scsi_cmnd_io with write buffer failed code = ffffffff
Smartctl open device: /dev/sg1 [areca_disk#01_enc#01] failed: Input/output error
**portinstall sysutils/areca-cli [#v62a3c06]
# areca-cli disk info drv=01
Drive Information
===============================================================
IDE Channel : 1
Model Name : Hitachi HTS723212L9A360
Serial Number : 081206FC1B00NGG
Firmware Rev. : FCBOC30F
Disk Capacity : 120.0GB
Device State : NORMAL
Timeout Count : 0
Media Error Count : 0
Device Temperature : 32 C
SMART Read Error Rate : 100(62)
SMART Spinup Time : 253(33)
SMART Reallocation Count : 100(5)
SMART Seek Error Rate : 100(67)
SMART Spinup Retries : 100(60)
SMART Calibration Retries : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.
* disc failer [#k82735e5]
# areca-cli disk info drv=03
GuiErrMsg<0x12>: No Such Device.
アラームが鳴動していて、No1のHDDが故障している模様。そほまま、引き抜き。
手元のSSDをボリューム削除してブランクにして、Hotなまま挿入。自動でリビルドがはじまる。
# areca-cli disk info drv=03
Drive Information
===============================================================
IDE Channel : 3
Model Name : INTEL SSDSC2CT240A4
Serial Number : CVKI3201004J240
Firmware Rev. : 335u
Disk Capacity : 240.1GB
Device State : NORMAL
Timeout Count : 0
Media Error Count : 0
Device Temperature : 255 C
SMART Read Error Rate : 255(255)
SMART Spinup Time : 255(255)
SMART Reallocation Count : 100(0)
SMART Seek Error Rate : 255(255)
SMART Spinup Retries : 255(255)
SMART Calibration Retries : N.A.(N.A.)
===============================================================
GuiErrMsg<0x00>: Success.
*Areca de SMART [#y3d9f5c5]
https://www.smartmontools.org/ticket/230
root@kuji:~:18_04_26:9:46 # smartctl --all --device=areca,1/1 /dev/arcmsr0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 10.4-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 7K320
Device Model: Hitachi HTS723212L9A360
Serial Number: 081206FC1B00NGG0ZNAC
LU WWN Device Id: 5 000cca 587c07314
Firmware Version: FCBOC30F
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Apr 26 09:47:27 2018 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 45) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1470
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 001 001 000 Old_age Always - 44549
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1470
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 093 093 000 Old_age Always - 1457
193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 6352148
194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Min/Max 15/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----
Total access &counter(total);:本日 &counter(today);:昨日 &counter(yesterday);
#counter([total|today|yesterday]);