![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
CONTENTS #contents ---- Lastmodified &lastmod; ---- *Areca [#ga528b05] http://dokuosan.net/zousan/nikki105.html http://www.kuji-clinic.info:81/ http://www.kingtech.co.jp/common/products/areca/file/RAIDCard_BIOSUPDATE_TCPIP.pdf http://www.ask-corp.jp/faq/index.php?action=artikel&cat=58&id=431&artlang=ja **dmesg [#e42ea669] arcmsr0: <Areca SATA 3G Host Adapter RAID Controller arcmsr version 1.20.00.28 2013-09-13 > mem 0xe0600000-0xe0600fff,0xe0000000-0xe03fffff irq 18 at device 14.0 on pci2 Areca RAID adapter0: ARC-1210 F/W version V1.46 2008-08-06 atapci1: <Intel ICH8 SATA300 controller> port 0x2438-0x243f,0x2454-0x2457,0x2430-0x2437,0x2450-0x2453,0x2410-0x241f,0x2400-0x240f irq 19 at device 31.2 on pci0 ata3: <ATA channel> at channel 0 on atapci1 ata4: <ATA channel> at channel 1 on atapci1 atapci2: <Intel ICH8 SATA300 controller> port 0x2428-0x242f,0x244c-0x244f,0x2420-0x2427,0x2448-0x244b,0x20f0-0x20ff,0x20e0-0x20ef irq 19 at device 31.5 on pci0 ata5: <ATA channel> at channel 0 on atapci2 ata6: <ATA channel> at channel 1 on atapci2 pass1 at arcmsr0 bus 0 scbus0 target 16 lun 0 pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device da0 at arcmsr0 bus 0 scbus0 target 0 lun 0 da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device da0: Serial Number 0000000442740780 da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit) da0: Command Queueing enabled da0: 228881MB (468749312 512 byte sectors: 255H 63S/T 29178C) ** smartctl [#u4453142] # smartctl -a --device=areca,3/1 /dev/arcmsr0 -T permissive smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: Input/output error === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: [No Information Found] Local Time is: Thu Sep 3 18:02:45 2015 JST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. # smartctl -a -d areca,1 /dev/sg1 smartctl 6.4 2015-06-04 r4109 [FreeBSD 9.3-RELEASE-p24 amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org do_scsi_cmnd_io with write buffer failed code = ffffffff do_scsi_cmnd_io with write buffer failed code = ffffffff do_scsi_cmnd_io with write buffer failed code = ffffffff Smartctl open device: /dev/sg1 [areca_disk#01_enc#01] failed: Input/output error **portinstall sysutils/areca-cli [#v62a3c06] # areca-cli disk info drv=01 Drive Information =============================================================== IDE Channel : 1 Model Name : Hitachi HTS723212L9A360 Serial Number : 081206FC1B00NGG Firmware Rev. : FCBOC30F Disk Capacity : 120.0GB Device State : NORMAL Timeout Count : 0 Media Error Count : 0 Device Temperature : 32 C SMART Read Error Rate : 100(62) SMART Spinup Time : 253(33) SMART Reallocation Count : 100(5) SMART Seek Error Rate : 100(67) SMART Spinup Retries : 100(60) SMART Calibration Retries : N.A.(N.A.) =============================================================== GuiErrMsg<0x00>: Success. * disc failer [#k82735e5] # areca-cli disk info drv=03 GuiErrMsg<0x12>: No Such Device. アラームが鳴動していて、No1のHDDが故障している模様。そほまま、引き抜き。 手元のSSDをボリューム削除してブランクにして、Hotなまま挿入。自動でリビルドがはじまる。 # areca-cli disk info drv=03 Drive Information =============================================================== IDE Channel : 3 Model Name : INTEL SSDSC2CT240A4 Serial Number : CVKI3201004J240 Firmware Rev. : 335u Disk Capacity : 240.1GB Device State : NORMAL Timeout Count : 0 Media Error Count : 0 Device Temperature : 255 C SMART Read Error Rate : 255(255) SMART Spinup Time : 255(255) SMART Reallocation Count : 100(0) SMART Seek Error Rate : 255(255) SMART Spinup Retries : 255(255) SMART Calibration Retries : N.A.(N.A.) =============================================================== GuiErrMsg<0x00>: Success. *Areca de SMART [#y3d9f5c5] https://www.smartmontools.org/ticket/230 root@kuji:~:18_04_26:9:46 # smartctl --all --device=areca,1/1 /dev/arcmsr0 smartctl 6.6 2017-11-05 r4594 [FreeBSD 10.4-RELEASE-p8 amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K320 Device Model: Hitachi HTS723212L9A360 Serial Number: 081206FC1B00NGG0ZNAC LU WWN Device Id: 5 000cca 587c07314 Firmware Version: FCBOC30F User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3f SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 26 09:47:27 2018 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 45) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1470 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 001 001 000 Old_age Always - 44549 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1470 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 093 093 000 Old_age Always - 1457 193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 6352148 194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Min/Max 15/44) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ---- Total access &counter(total);：本日 &counter(today);：昨日 &counter(yesterday); #counter([total|today|yesterday]);
